Three Reasons To Have a Fall Mold Inspection
Fall is here, soon temperatures will begin to drop and you will need to turn on your furnace. Here are three reasons to have a professional mold inspection:
1. Prevent Mold Spores From Getting In Your HVAC System
In most homes, the furnace is located in the basement, usually in the storage area. The basement is also one of the most common areas for mold to thrive and grow because it is a dark, moist area. You will know you have mold issues if you smell a musty, earthy odour. This past summer, many homes were flooded and if they were not dried properly, the prevalence of mold issues is highly likely.
If mold is prevalent in the basement, one of the major concerns is to prevent air borne spores from spreading throughout the rest of the home. In other words, turning on your furnace when there is mold in the basement could spread the spores throughout the home contaminating more areas.
The number one reason to get a Fall mold inspection is to prevent the spread of mold into other areas of your home when you turn on your furnace. If the mold inspector finds mold in the basement, then potential cross contamination can be prevented with a remediation plan.
2. Better Health
Unfortunately, when Fall and Winter arrive, many blame health issues on colds and the flu. However, what most people do not realize is that mold spores can cause many of the symptoms we experience when we think we have a cold or flu:
- The sudden onset of allergic symptoms involving the respiratory system such as cough, congestion, sinus infection, asthma, and bronchitis.
- Unexplained headaches, decrease in attention span or memory, difficulty concentrating, or dizziness.
- Other physical symptoms of mold could include skin rash, itchy eyes, fatigue, and a general unwell feeling that disappears when leaving the house.
Many of the symptoms above would be diagnosed as cold or flu symptoms by a Doctor. As our toxic mold survivor interviews show, this is a common occurrence simply because most Doctors are not trained to identify sickness caused by mold.
If you experience these symptoms soon after turning on your furnace, then you likely have mold spores circulating in your home.
To verify that you have mold issues, you can check the furnace for black, gray-brown, gray-green, or white-and-orange spots. The insulation, condensers, cooling coils, and drip pans of furnaces and air conditioners, as well as the ducts are all potential areas where mold growth can occur. If you get mold in your HVAC system, you can get your ducts cleaned by a professional. Duct cleaning is only recommended, however, if the core problem causing the mold issues and the primary source of the mold contamination is properly cleaned.
3. Peace of Mind
Trained mold inspectors follow a step by step protocol to determine if there is a mold problem. They will do visual inspections; ask questions to get a better idea of the building history to find out about leaks, floods, etc. any indication of past moisture issues; measure the moisture levels; and may recommend that tape, swab, or air quality tests be done to determine the type of mold and the spore count in the home.
The relative cost of a mold inspection compared to the potential health issues and eventual structural issues that mold can cause in a property is minor and should give you a significant amount of peace of mind knowing that you have had a professional inspection done.
Bottom line, if you suspect that you have any mold concerns, particularly in your basement, we strongly recommend that you have a professional examine the problem so that you can prevent the spread of the mold throughout your home when you turn on your furnace.
If you have questions, call us toll free, 1-888-909-6653 or use the form below.
— #GotMold?™ (@gotmoldglobal) October 20, 2014