Air Contamination Becomes Growing Concern in Chestermere

chestermere flooding

Severe thunderstorms cut power to traffic lights and homes while heavy rains inundated neighbourhoods Sunday morning, slamming Langdon and Chestermere with overland flooding.

Air Contamination Becomes Growing Concern in Chestermere, Alberta
As more and more concerns begin to surface in terms of how safe remediation processes really are, one big concern that is coming into play is air contamination. After the recent devastation, homes that were left for long periods of time sitting in stagnant water are now at risk of mold contamination, which can also lead to serious air contamination.
Recently, in the news you may have seen the devastation of the flash flooding that took place in Chestermere. Two flash floods in less then a week.
Basically what happens is when people go into the basements of course they want to get everything out right away,…but they’re not taking any precautions as to whether there is asbestos or mold contamination….If there was a large mold contamination and it’s been disturbed, that mold will give off a mycotoxin. That’s when you run into musty odour, earthy urine-like odours….[With respect to asbestos] it is a very tiny fibre that has a fish hook resemblance, so when it gets into the lung, it locks itself in and doesn’t come out then causes an infection and the next thing you know cancers start to grow. With asbestos, we all know that it’s lethal, and usually takes around 20 years to set in before someone actually gets sick from it.
Before re-occupying a home after clean up and to avoid potential health complications from poor air quality caused by mold and asbestos, got mold? recommends air quality tests be done:
When reoccupying the home, what people should be doing is contacting a professional company to come out and do an assessment to test the air for mold and asbestos fibres then send that off to a lab and get that information.
An air quality test will determine if there are asbestos or mold concerns. This is important because if mold spores or asbestos fibres have been disturbed, they will settle in other parts of the home. As stated by Watson:
(In the future) every time someone starts the vacuum or walk across the carpet the spores go back into the air, then you’re breathing it in, and the problem is you can’t see the spores that can cause future problems.
Air quality tests for mold are important because they will compare the spore count inside of the house with the spore count outside of the house. For instance, when one house was tested, outdoor mold spore contamination was at a level of roughly 3,800 spores/m3, and in comparison, indoor levels of the contaminated home reached roughly 107,500 spores/m3. Such a high spore count is not healthy.
With respect to asbestos, any home built before 1990 should be tested for air borne asbestos fibres. Friable fibres in the air are a serious hazard to one’s health. To learn more about why asbestos is hazardous, watch the video below prepared by WorkSafe BC.
According to President James C. Watson founder of got mold? Disaster Recovery Services, the results of the air quality test will give the property owner the right information to determine if it is safe to re-occupy the house. If the results prove there is evidence of mold or asbestos, then Watson recommends that professionals be hired to abate the issues because reputable restoration companies use specific procedures to prevent cross contamination and specialized equipment to clean the air.
In addition, Watson believes that the key to preventing future mold issues is to ensure that the home is completely dried out before any reconstruction begins. This is vitally important because if moisture is trapped between insulation and drywall, mold will grow again. In the words of Watson, “drywall is a buffet for mold.” Not only will future mold growth causes health concerns, but it will also impact the structural integrity of the property.
We just want to make sure that the air quality is safe when reoccupying the home. And if it has already been reoccupied, then lets put that stamp of approval on it
Well stated Mr. Watson. If you are planning to re-occupy your home or are currently staying in your home after a flood and want to ensure that the air quality is safe, contact us. In addition, if you recently had your home remediated for mold and/or abated for asbestos and want to ensure that the contractor you hired did a proper job, contact us for Post-Remediation Verification, to ensure that the work was done right.
Posted in Asbestos, Asbestos and Health, Flood, got news?, Health, Mold Facts, Mold in Public Buildings, Mold in Schools, Mold In The News | Tagged , , , , , , , , , , , , , , , , , ,

About got mold?™

got mold?™ is a locally owned and operated Canadian company with over 25 years of combined experience in the disaster restoration industry. A Message from the President Mold is a growing concern. To continue to thrive as a business over the next ten years and beyond, we must look far ahead, understand the ever changing world and power in order to structure our business in the future and maneuver in such a way that will allow us to anticipate challenges we face throughout our journey, enabling us to continue operating as a world class company employing great people for continued success. Our Mission Find & fix sources of unhealthy indoor air Our Vision Healthy indoor air Our Core Values Dependable - We make commitments and meet them Resourceful - We find a way or make one Knowledgeable - We are certified and constantly learning Productive - We get it done right ASAP Trustworthy - We have a great reputation Loyal - We are proud of our company and its values Ethical - We don’t compromise our values and we don’t cut corners Respectful - We care about people, property and good stewardship of money All this while maintaining the utmost in health & safety standards. Indoor air quality specialists, we are experts in mold testing, removal and remediation; fire and flood damage restoration; indoor air quality testing; asbestos surveying, asbestos testing, sampling and abatement.